3P densi series

Contact

To our Contactform

Service Hotline
+49 8134 9324 0

Email
info@3P‑instruments.com

3P densi series – gas pycnometers

The 3P densi instruments are single-station automatic gas pycnometers for volume and density measurement of porous solids and powders. The sample volume of 3P densi 100L ranges from 10 cm³ up to 100 cm³, the 3P densi 100S holds sample cylinders from 1 cm³ up to 10 cm³. The instrument is easy to handle using the 10-inch touch-screen.

Specifications/Features/Benefits

  • Easy to handle the instrument by the 10-inch touch-screen
  • Additional measurement option for measuring of the closed cell content for foams and other samples
  • Measurements and printout of results are totally automatic. Continuous self-diagnostics monitor and signal fault conditions that may arise. The transducer is reset to zero prior to each run. Front panel LED’s display the operational status at all times.
  • Sample temperature is displayed and printed to ±0.1 °C. This feature is important for (a) verifying operation at the calibration point or, (b) making corrections when analyzing larger quantities of materials whose density varies significantly with temperature.
  • Pycnometer volume calibration spheres can be provided with a report of calibration using measuring devices traceable to National Institute of Standards and Technology

Other Density Analyzers:

BeDensi T series1-3 Station Analyzer
Contact

Service hotline (Germany)
+49 8134 9324 0

Contact us via Email
info@3P-instruments.com